IKEA LACK enclosure shelf support
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.34 – €8.98 net (excluding VAT)
For file: 4 x IKEA Lack supporto ripiano rinforzato MK3S_0.2mm_PETG_MK3S_8h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.16 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 8.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made the Ikea Lack enclosure (V2). With this print I added a shelf under it.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 69
- Makes
- 1
- Views
- 904
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I added a 3rd Lack table under the enclosure makig it taller and also put wheels.
Whe long legs are simply original ones screwed together with original ikea double-screw.
Put 2 very long screw from under the lower table for keeping in place the legs.
The shelf itself is from bigger the Lack table, cut in half. You'll have une side without the white finiture… I put this side on the rear!