Claws Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a creepy bookmark meant to make the book more thrilling. It can be scaled up to be set among books too.
- Rating
- 4.714 / 5
- Likes
- 155
- Downloads
- 1,181
- Makes
- 27
- Views
- 4,240
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Update 18/11/2022
Thank you all for sharing, printing and enjoying this humble print.
As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm as a bookmark.
Regarding the claws, I modified the clearance for those that couldn't make them fit. The space should be enough to make them fit and may even need a bit of glue.
Finally, I included a whole design, for those that prefer to print it in one piece. Maybe you have to print it upside down, to use the least amount of support.
Update: 12/04/2022
I added a new part "Claws-corrected". Thanks to PacmansRage for letting me know that the claws were inverted. I left the older version as it still looks cool.
Update: 28/02/2022
I added a new part "Bookmark longer" as some comments suggested having a longer version.
This is a creepy bookmark meant to make the book more thrilling. It can be scaled up to be set among books too.
I tested to add a clip to it, so that it stays put, but given the effect I wanted to achieve, I had to drop it. So it is simply a page marker, thin to avoid being bulky, but wide enough to be resistant.
The claws are small, meant to fit a regular book, rather than a big volume. They will be too long for some short books, so I made one hand pointing slightly upwards to help overcome this issue.
I printed mine in dark grey, and will probably paint the nails black.
Thank you all for the makes and the likes!!! I hope you enjoyed it!!!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20
Filament: 3n3 PLA Dark Grey
Notes:
I only add some support at the tip of the claws, and I designed this to be printed as a two part mostly so that the bookmark is flat on the bed and is stronger and less likely to break in two. But as some prefer to have is as a single one, I also included it.
If there's any modification you would like let me know. I don't have much free time, but I'll do them whenever I can.
Category: Other