Tenlog TL-D3 pro Voron Afterburner adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Also use BL-Touch sensor instead of whatever that thing is those Vorons use...
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 767
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print on back, supports if you need them.
I did not make any brackets to mount the circuit board, I threw all the Tenlog electronics away and use can-bus.
I printed it on the quick with a 1.0mm nozzle and it worked fine.
Remove the big heavy aluminum stuff, this mounts to the rail slider through the black belt holder bracket.
I cheated a little bit on the picture, I didnt take one of the bracket installed. So the print head will stick out a little further with this bracket, but not much, and you probably need to change nozzle position settings.
All the files should be the same, just different formats.