Soap dish
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: SoapDishInsert_A_0.3mm_PETG_MK3S_22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 22.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Minimalist soap dish
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 101
- Makes
- 1
- Views
- 629
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Contest Soap Dishes resultet in many different models of soap dishes, but ...
Do I want to spend more than 7 hours to print single soap dish? Not really.
I want something simple, nice looking and quick to print.
For this reason there is one more soap dish on Printables.
Print settings:
- Layer height: 0.3 mm
- Supports: No
Some remarks to the insert part.
Model of insert part is created as solid. Modified mesh is used to set top and bottom solid layers to 0 - for details see attached 3mf files. For my prints infill was set as Grid - other option could be Honeycomb.
Attached are two variants: A and B. In variant A insert part the insert part is simply laying on the dish - it is practical for cleaning of the dish. In variant B four connection posts between the insert part and the dish make a little bit stronger connection, but it is still possible to take parts apart for cleaning.