1 / 3
Arc Reactor Stand Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for an old hexagonal design arc reactor stand, to fit Aliexpress arc reactor kits.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 59
- Makes
- 0
- Views
- 1,445
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
- Print the model from https://www.thingiverse.com/thing:2927444 and print this adapter.
- File/adjust if required to test fit the adapter to the stand. Use cyanoacrylate glue and allow it to dry fully. Warning: patience is your friend, if you do the glue-up and immediately put your arc reactor on, you may get ‘superglue fogging’ on your freshly finished prop! Keep the curing superglue well away from your nice things.
- Trim/sand glue excess, friction fit your arc reactor directly on the adapter, and enjoy.