1 / 3
Door Handle Trim for 1987 Nissan D21 Hardbody — image 1
1 / 3

Door Handle Trim for 1987 Nissan D21 Hardbody

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Trim pieces for the Nissan Hardbody door handle, these are available aftermarket but don't seem to match the OEM as well

Rating
0 / 5
Likes
10
Downloads
137
Makes
0
Views
618
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

This was captured using a Revopoint Mini on a broken OEM trim piece and then repaired using Cloudcompare and Meshlab by cloning the opposite side and mirroring it to recreate the broken section.

I created this for another individual and have not received confirmation on fitment but visually it appears to be a one to one replica. Acetone smoothing provides a very nice finish though the top layer is still somewhat visible so you may want to experiment with scuffing that up prior to vapor smoothing for the smoothest look if not painting. I used PolyLite Black ASA for my copy.

Print Settings

Supports: Touching Buildplate

Infill: 100% - If you use less and sand or vapor smooth the part you may create pinholes which will need filler then paint.

Support Removal

Support removal is somewhat difficult on this part, I recommend using small flush cutters coming up from the bottom so you can grab and twist/pull the supports away. I have tried printing the opposite orientation but the surface finish was much rougher but you can flip in your slicer if you want easier support removal.

Vapor Smoothing/Painting

I have included a stand you can print to rest the part on when vapor smoothing or painting. If you are vapor smoothing an ABS/ASA part you will want to print this in PETG. Vapor smoothing will leave a small indentation on the underside of the part but it has no affect on the fitment or visual appeal once mounted on the vehicle.

Tags