1 / 2
Lack anti-vibration footpad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sort of enclosure to affix an anti-vibration pad to a Lack
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 67
- Makes
- 0
- Views
- 866
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted some anti-vibration pads under my Lack so I made a nice-ish looking transition for the leg to enclose a pad.
The pad used can be found here: https://www.amazon.com/gp/product/B00BVEMLR4
I cut the thing into shape using a chop-saw, so if you have one hand it would be helpful. Used superglue to fasten the pad to the plastic piece.
Notes on printing
Pad was printed as shown in the model, I printed in ABS and I needed helper disks on each of the 4 edges to aid in adhesion. You could also add a brim. Bridges weren't an issue.