140mm Fan Guard
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.12 – €7.48 net (excluding VAT)
For file: T-PANL-100-001-TrilliumFanguard_140mm_1.1_0.15mm_PETG_MK3S_8h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.80 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 8.51 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Made 80mm for another application, decided to do something about my ghetto CPU
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 0
- Views
- 523
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a logo fan cover to fit a 140mm fan. I had to rebuild a PC at the height of COVID and the only CPU cooler I could get didn't fit in the case (which is an expensive custom audio tower) so I uhh did the ugly thing.
It's fussy as hell to print because I felt all fancy and domed it. Which means it prints in one direction, and it sprays a whole bunch of supports in an intricate little lacy pattern. This is best solved by setting “first layer expansion” to “a big enough number that you get a solid raft.” Included gCode file does that for PETG. You may also want to slow the base layer down to like 70%, and it'll booger less if you print it at like 90% speed. I would write this into the code but I am a lummox.
I've included the Solidworks file if you wanna get rid of my bitchin' logo. Included file also includes some farkles for captive nuts.