1 / 5
PocketBac Hand Sanitizer Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple pocket clip for Bath & Body Works' PocketBac hand sanitizers. Uses a piece of 1.75mm filament for added…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 100
- Makes
- 0
- Views
- 827
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple pocket clip for Bath & Body Works' PocketBac hand sanitizers.
Uses a piece of 1.75mm filament for added strength (optional).
Post-Printing
- Cut a small length of 1.75mm filament, long enough to comfortable work with -- this can be trimmed down later.
- Insert the filament into the hole on the clip so it is flush with the inside surface (it it's sticking out it will snag on your pocket). Add a dab of glue to keep it in place if need be.
- Apply glue to the mating surfaces (where the clip will attach) on the sanitizer holder piece.
- Align the two parts so that the opening of the clip is facing outwards and insert the other end of the filament through the hole in the sanitizer holder piece.
- Press the two pieces together firmly until the glue sets.
- Trim the excess filament using flush cutters.
To attach the clip, insert the lip of the sanitizer bottle sideways through the opening, and rotate so the label is facing forwards.
Category: Household Supplies