Train Tracks
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.53 – €10.43 net (excluding VAT)
For file: 0.2mm fast print files / threewaypointspair_02mm_pla_mk3s_7h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.48 excluding VAT (range midpoint).
- Weight reported by the author
- 159 g
- Print time reported by the author
- 7.55 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small collection of tracks I modeled as a present.
- Rating
- 5 / 5
- Likes
- 168
- Downloads
- 879
- Makes
- 8
- Views
- 4,496
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Public Domain
A small collection of tracks I modeled as a present. They should fit an Thomas the Tank engine track set but I've only tested it on one.
Includes:
1 straight section
1 flex section
2 three way forks
1 intersection
Print instructions
For the flexible track make sure you have the temperature and retractions dialed so that you have no stringing otherwise the piece will bind up a bit. I used PETG as it would likely handle wear and tear better. Only had two break so far and both were due to excess abuse (as a toddler is expected to do).