Uberspace Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the SpaceX-Coaster (https://www.prusaprinters.org/prints/88-spacex-landing-pad) I made a coaster with the…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 1
- Views
- 699
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the SpaceX-Coaster (https://www.prusaprinters.org/prints/88-spacex-landing-pad) I made a coaster with the logo of the awesome webhoster Uberspace (https://uberspace.de).
Please note that the logo is property of Uberspace and not my work, I just threw it on a coaster.
Also important note: you need openSCAD 2019.05 to open the scad file, older versions don't support importing SVG.
As the logo is not my property please note the non-commercial license!
Print instructions
This print is sized to match .15mm layers with a .2 first layer. The result might differ with other layer heights.
If you want to print this like shown in the photo, place a modifier with height 2.9 on the ground, set the top and bottom layers to 0 and set a prefered infill and fill density (on the photo you see 60% triangular infill).
You also need filament changes ad 3.05, 3.5 and 3.95. The order of the colors is:
- your prefered base color
- black
- white
- red
You may use the supplied 3mf file with PrusaSlicer (generated with Version 2.2).