Guitar Under String Radius Gauges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of 5 common radius, and some less common, for checking a guitars fret board radius with the strings on.
- Rating
- 4.857 / 5
- Likes
- 198
- Downloads
- 2,404
- Makes
- 16
- Views
- 8,031
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
New Dual Colour version!
I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion.
Set of 5 common radius, and some less common, for checking a guitars fret board radius with the strings on. Also useful when setting the action to ensure it follows the radius nicely.
Currently comes with 7.25", 8.5", 9.5", 10", 11", 12", 15", 16" and 20" which covers a large section of instruments. If you need one not covered then let me know and I'll probably be able to add it.
All gauges have a small chamfer at the base which is there to remove the first layer squish meaning this should be ready to use straight from the print bed with no clean up.
Featured on the Prusa blog! https://blog.prusaprinters.org/3d-printed-guitar-accessories_59464/