1 / 11
Altermotor: Alternator to BLDC (PMSM) Motor Conversion — image 1
1 / 11

Altermotor: Alternator to BLDC (PMSM) Motor Conversion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here are the .stl files for printing. Check out my YT channel for the how to and testing videos. Link on my profile.

Rating
0 / 5
Likes
14
Downloads
145
Makes
0
Views
1,370
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Want an electric gokart motor, but don't have $500+, and all you have is an old, busted alternator taking up space in the garage? Well, I have news for you!

Take that chunk of automotive/E-waste and turn it (and about $60 worth of parts and magnets) into a sweet, powerful electric motor! Watch my YouTube vids for more

 

Background:

I wanted to electrify some projects and didn't want to spend hundreds of dollars on electric motors. So I designed my own solution (under my own volition, I'm not saying I invented this method) to the afore mentioned dilemma.  

I picked up some old (new and used) alternators on marketplace and craigslist, dismantled them to see what I can use, then fired up Solidworks to design a permanent magnet rotor core. 

Why didn't I just use the alternator backwards? 

  • I did at first, actually! In order to do so, I removed the rectifying diode packs, and left the brushes in and stator winding ends sticking out. I then attached a 12V power source to the brushes to activate the electromagnetic rotor core, and a BLDC controller to the stator windings. Even at full bore, I could stop it with my hands (using a 3S LiPo for power). So I designed a core based on materials I can get from McMaster Carr and Amazon, tested it again and was surprised at the results. I couldn't stop the shaft with my hands! This thing had speed and power! 

Well, fast forward 1 year and 4 more altermotor builds later, and I used a big one on an electric motor driven cycle project, my Electric Mini Chopper. Check my U-Toobs for a glimpse. 

Now I am honing the core design to give higher torque, lower cogging torque, and higher efficiency (implied by the first two). I am diving into motor design and finding out the best solution to use with these alternator stators.

My Altermotors:

AC Delco 106mm is in the mini chopper altermotor

AC Delco 88mm is a test bed for core magnet topologies and has hall effect sensors

  • This stator has sinusoidal windings, with a coil gap of 3, 36 slots, and is in a Wye configuration.

The remaining 3 are Bosch altermotors with differing core diameters. 

  • One has decoupled phase ends, so I can use it in Wye and Delta configurations
  • Two are dual 3-phase, which I am pondering the use case for, outside of power generation. You can run each of the 3-phase groups separately, but can't couple or bridge them together, so you end up not using half the copper as a motor. As generators, the 60 degree phase shift between each group allows for a smoother voltage ripple once rectified.

Tags