Prusa Mk2 Antivibfoot
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.83 – €1.02 net (excluding VAT)
For file: Antivib foot - Antivibfoot_0.15mm_PETG_MK2S_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.08 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A foot that prevents vibration
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Hello,
Here is a version of anti-vibration foot which in my opinion offers a good compromise between anti-vibration and stability.
I used an old pool filter seal which is very flexible. It measures 6.1mm in diameter (réf. is R152501W - 40 Shore index). Maybe you could even print it with the right filament.
Otherwise you can take a normal O-ring but the result is better with a very flexible seal.
For it to hold well, I recommend gluing the joint and the foot.
You can find a step file if you want modify it.
I print it in PET, no support @ 0.15 mm.
Bye and have good print.