Google Nest Mini - Google Home Mini splash proof wall holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to hang a google home mini outside. It's splash proof (but for very light amounht of water). It needs to be…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 618
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I wanted to hang a google home mini outside. It's splash proof (but for very light amounht of water). It needs to be under a roof or something - I can't say it will stand under pouring rain.
The picture was from a print using IdeaMaker as slicer which lets you put texture on prints (very very cool btw). That texture is not in the original file.
It's meant to hang "down". Meaning the google home is lower than the plug. The plug hole is round so it should fit different electric standard outlets.
The sound holes have a weird angle on purpose, to help the splash proof part - in theory frontal water shoudn't easilly get it. There's also a micro grid within the holes (not really needed but it's there...) to deter insect from using it as a nest.
Enjoy.
Print Settings
Printer:
Snapmaker 2
Rafts:
No
Resolution:
Large is fine. I printed at 0.32
Infill:
20%
Filament: eSun pla 1.75 Ran out! So I printed in silver and copper
Notes:
Lid - print flat. Easy
Case - both options can:No support:
- Print the face with the holes down - and you don't need support. My printer is crap so I always get an ulgy first layer - so I use the other way:
With Support but cool skin effect:
- You will need support if you print with the front with holes facing to the top. But because it's angled - you can use cool texture (fuzzy skin in Cura - or my favourite very cool textures with IdeaMaker - search that on youtube)
Post-Printing
Option (not really needed) but if you REALLY want it more waterproof
If you want to make it even more waterproof - you can coat the inside with a "spray putty" to fill all the gaps, or coat it with a think varnish (polyurethane, epoxy). Don't forget to open the holes with a toothpick lol! But that's very much optionnal.
How I Designed This
Fusion 360
I designed in Fusion 360 and I added that file as well - with all my edits.
Category: Audio