1 / 3
Sovol SV04 5015 Fan Duct
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pivoting 5015 fan duct for sovol SV04
- Rating
- 4.333 / 5
- Likes
- 47
- Downloads
- 269
- Makes
- 3
- Views
- 2,279
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I found that the standard cooling fan on sovol were not very effective so i design this upgrade.
This model also allows for the duct to pivot out of the way to make nozzle swaps much easier.
Hardware needed:
4x M3x20 bolt and nut
2x M5x20 bolt and nut(lock nut is preferred)
6x M3x10 bolt
I recommend using PVA supports everywhere, it may be possible to use standard supports but i haven't tried it.
The duct is very close to the hotend so use PETG or ABS (i used PETG and it seems to perform well so far)
(Update 27.11.2022) Added mounts with slots to allow adjustment up and down