Short Drain to Direct Water Flow LR2239
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A short drain to be mounter under a pot or pipe to direct the water flow into a desired direction. Various sizes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
This is my simple design of a short drain that can be printed with PETG and without any supports. The idea is to glue or screw this drain on the bottom of a container, pot or pipe to direct the water flow into the desired direction.
How to Print the Drain
Print the drain with the rim on the printer bed. See project for all required parameters LR2239-L100-W50-S08-R08 Print.3mf or adjust them according to the following table.
| Nozzle Size: | 0.4mm, 0.6mm or 0.8mm |
| Layer Height: | 0.2mm or matching the nozzle size |
| Filament Materials: | PLA or PETG |
| Perimeters: | 2 perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
| Supports | No supports required |
Dimensions
The individual values are prefixed in the part ID and filename with the letter you see in the drawing above.
LR2239-L<length>-W<center width>-S<slope>-R<rim width>
Length (L)
The length is the distance from the center to the tip of the drain in mm.
Center Width (W)
The center width is the diameter and also the inner width of the drain at the rim side. The value is in mm.
Slope (S)
The slope is the height difference from the center to the tip in mm. Larger values mean a steeper slope.
Rim Width (R)
There are three different widths of the rim. The value is the with of the rim in mm on the top side.
Height (H)
In the catalog, you also find the approximate height of the drain from the top side to the tip in mm. This value is rounded to the nearest mm, and the drain can be slightly higher.
Catalog PDF
Check out the catalog LR2239 Catalog.pdf for all models and all dimensions.
Fusion360 Design
You can buy the Fusion360 design for a small amount, supporting the work on this and future designs.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
Conclusion
If you like this design, please rate it and share some photos.
Happy printing! 😄