1 / 2
Reverse Bowden Adapter for Hall Precision's SingleCell Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to secure a bowden to the top of the SingleCell enclosure by Hall Precision inside the filament…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 1
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is an adapter to secure a bowden to the top of the SingleCell enclosure by Hall Precision inside the filament feed gap.
It requires at least 1 PC4-M10 1mm pitch bowden adapters. A 2nd one can also be used for the top. You will also need a couple of M3x12 screws.
I suggest moving the bowden all the way to one side -- but it still might be a sharp angle when the extruder goes all the way to the top.
Print instructions
I used fine setting (0.1) to get the best threads possible.