1 / 1
Wingnut (M4 & M3)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wingnuts for M3 and M4 screws.
The M3 Wingnut is just scaled down to 79% from the M4 Wingnut.
Nice easy print. Print with the flat face on the print bed. Tap in the appropriate nut.
PTEG probably best - PLA might crack when you tap the nut in
Layer height 0.15mm
Infill 100%
Scaled to 101% for Prusa's recycled PTEG
No brim, skirt or supports
Should take about 16 mins for the M4 Wingnut and 11 mins for the M3.
If bed adhesion fails just add a small brim.
Best regards, Paul