1 / 3
TV Nozzles for Freewing SU-35
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative nozzles for the Freewing SU-35. These are adjusted for Wemotec Midifan.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 0
- Views
- 646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These nozzles should be printed using LW-PLA. At 50% extrusion rate, two perimeters and 10% Gyroid infill these are slightly lighter than the original nozzles. Need to extract the ball joints from the original nozzles and glue into the provided sockets. Nozzle needs to be mirrored in slicer for right side. Exit diameter can be adjusted to different impellers using FreeCAD.