1 / 2
Lightswitch Zombie
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Thin print, can be a bit tricky to remove from the print bed. Using glue stick on the print surface and washing it off, while the print is still on, helps.
Use a thin metal ruler to gently pry the lightswitch cover off the wall and slide the Zombie in.
Lightswitch Zombie.stl is shown in the photo.
Lightswitch Zombie with Eyes.stl is shown in the drawing. It has the eyes filled in and raised, so a multicolor print can be done with a pause command or MMU.
No supports needed, filament type doesn't matter.