CamelBak Plain Cap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.08 – €2.54 net (excluding VAT)
For file: cap_with_loop_02mm_petg_mk2s_2h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.31 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 2.4 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Plain cap for CamelBak Eddy bottles. Might also fit other models. Designed to seal perfectly.
- Rating
- 4.5 / 5
- Likes
- 9
- Downloads
- 69
- Makes
- 2
- Views
- 566
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Plain cap for CamelBak Eddy bottles. Might also fit other models. Designed to seal perfectly. Available with and without loop.
I propably should put here disclaimers about 3D prited parts and food safety, but I'm not your mom so do what you please.
Just please don't print this in ABS.
Print instructions
When priting at 0.2mm layerheight make sure that total number of top and bottom solid layers are at least 10 (2mm), so there is not cavities where liquid could get into.
Also recommend making perimeters at least 3 layers thick.