Nerf Recon CS-6 to Retaliator spring adapter.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows Retaliator Parts to work inside an older Recon CS-6
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 1
- Views
- 652
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a modded Nerf Retaliator and want to install the leftover stock parts into an older Recon CS-6 you will need this spacer/spring guide.
This spacer holds the smaller direct plunger Retaliator spring concentric with the plunger system and also provides a guide for the Retaliator plunger rod.
If the blaster doesn't prime after doing the parts swap glue a 2mm pad into the cavity at the front of the Retaliator plunger rod. This will add some travel distance to the plunger rod allowing it to catch.
If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman