Dust Deputy Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptor to attach a Shop Vac hose to a Dust Deputy. The hose I have is 1 and 7/8" outside diameter. The…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is an adaptor to attach a Shop Vac hose to a Dust Deputy. The hose I have is 1 and 7/8" outside diameter. The adaptor can be printed as shown in the STL file diagram. The bottom 30 mm attaches to the Dust Deputy as it has a small taper inside that fits the taper on the Dust Deputy. The top 40 mm is where you push the hose into. It is best to add a liberal amount of silicone to the hose end first and let it dry overnight in order to get an airtight seal (see photo).
I printed this with PETG+
If you want to see the cart I built for this check out my YouTube channel: https://www.youtube.com/watch?v=QoAkAO4JFoA&t=33s
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50
Filament: SunLu PETG+
Category: Parts