Match Striker - Dome
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.48 – €4.26 net (excluding VAT)
For file: match striker_0.2mm_PLA_MK3S_4h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.87 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 4.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Match striker for strike anywhere matches. Safety matches will not work
- Rating
- 1 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 504
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Dome Match striker
Fuzzy skin feature provides enough friction to light matches
Must use “strike anywhere” matches, will not work with safety or “strike on box” matches
No supports needed, 0.2 mm layer height, smaller variable layer height on top to decrease flat spots
Fuzzy skin: Outside Walls
Fuzzy skin thickness: 0.1 mm
Fuzzy skin point distance: 0.1 mm
