1 / 6
A (remix of) a gripper based on the fin ray of a fish tail — image 1
1 / 6

A (remix of) a gripper based on the fin ray of a fish tail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.49 – €1.82 net (excluding VAT)

For file: 3xfinraygripper_petg_06n_03mm_petg_mk3s_1h19m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.66 excluding VAT (range midpoint).

Weight reported by the author
30 g
Print time reported by the author
1.31 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

This is a gripper that bend around the stuff you pick up. It is based on the principal of the fin ray of a fish tail.

Rating
4 / 5
Likes
11
Downloads
77
Makes
1
Views
942
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a gripper that bend around the stuff you pick up. It is based on the principal of the fin ray of a fish tail. See also this video of a (bit too old and dry) fin ray of a tilapia fish: https://vimeo.com/22739805

This gripper can be handy too grip dirty stuff like money or garbage in times of the Corona and Covid crises.

This principal of the fin ray is also interesting for other applications like wings, sails, propellers, rudders, keels etc.
Remix of https://www.thingiverse.com/thing:3757806
Also check this:
Festo Japan: https://www.youtube.com/watch?v=byKm9vO_pvM&t=5s
Another remix: Gripper https://www.youtube.com/watch?v=90cXfaFM4O8
See also Fish Swimming, by John J. Videler, Chapter 3.3 Fin Rays, page 45, Chapman & Hall 1993, ISBN 0-412-40860-0.

Use PETG as PLA is not both so strong and flexible.
Do not clean with hot water as your print will deform.

The tests with "inbetweens" are too stiff.