simple riser for clothes horse - rack / vacuum robot wall
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.07 – €1.31 net (excluding VAT)
For file: riser_set_four_0.6n_0.4mm_PETG_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.19 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 39 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple solution to rise your clothes horse up to 1 cm to trigger the vacuum robot's bumper
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 171
- Makes
- 3
- Views
- 1,169
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the very nice solution from SpamBouncer to lift up the clothes horse for 1 cm to trigger the vacuum robots bumper. Roborock vacuum cleaner in my case.
Matches on clothes horse with a pipe diameter of roundabout 16 mm
I've skaled SpamBouncer's solution down to 20 mm in z for saving some filament and printed it in PETG. Other material should work as well.
Use my fast printing profile for 0.6 mm nozzles (PETG) or made your own!
Have fun!