Voron V0.1: Shim for adjustment springs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Voron V0.1 uses the improved "Kirigami" bed by Christoph Mueller. This shim increases screw tension.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 103
- Makes
- 3
- Views
- 731
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The shim increases the tension of the bed springs. I found them too loose on my build, and played a bit with different shim thicknesses. 3mm is a nice fit for the yellow standard tension springs.
Print these in ABS or better for obvious reeasons :) I used Polycarbonate, as it resists even more heat.
I made a triangle version as it matches the Kirigami. The round version is functionally the same. Pick what you like :)https://cad.onshape.com/documents/b3dab41fc3c48bbcbf576088/w/5fd5dcd926104f53a0641cd8/e/68c04d108a48969cead9721b?renderMode=0&uiState=6352cccba10e15610f329d47