Decoration bat for Halloween (foldable) ~ Chauve-souris de décoration pour Halloween (pliable)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.14 – €0.17 net (excluding VAT)
For file: Decoration bat for Halloween (foldable)_0.2mm_PLA_MINI_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Decoration bat for Halloween (foldable) ~ Chauve-souris de décoration pour Halloween (pliable)
- Rating
- 5 / 5
- Likes
- 143
- Downloads
- 593
- Makes
- 10
- Views
- 2,038
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution
(pour le français, voir plus bas)
Decoration bat for Halloween with bendables wings. You can use tape to hang it on the wall. Be careful when removing it from the board. The bat is 0.4mm thick, print at 0.1mm or 0.2mm.
For another models:

https://www.printables.com/model/300135

https://www.printables.com/model/620236

https://www.printables.com/model/620260

https://www.printables.com/model/621665
Settings
Nozzle: 4mm
Resolution: 0.2mm
Infill: 15%
Rafts: no
Support: no
Duration: ~15m
Printer: Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini
Material: PLA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Chauve-souris de décoration pour Halloween avec ailes pliables. Vous pouvez utiliser du scotch pour l'accrocher au mur. Faîtes attention lorsque vous le retirer du plateau. La chauve-souris fait 0.4mm d'épaisseur, veuillez l'imprimer à 0.1mm ou 0.2mm.
Pour d'autres modèles:

https://www.printables.com/model/300135

https://www.printables.com/model/620236

https://www.printables.com/model/620260

https://www.printables.com/model/621665
Configurations
Buse: 4mm
Résolution: 0.2mm
Remplissage: 15%
Rafts: non
Support: non
Durée: ~15m
Imprimante: Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini
Matériel: PLA