Warrant Officers - Bars/Blocks (US Army)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Warrant Officer rank insignias of WO1, CW2, CW3, CW4, and CW5 in the U.S. Army. Print and have fun!
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 284
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
Can't forget about my Warrant Officers in the US Army!
If using PLA, I recommend resizing the blocks to 98.5% so it can fit snug/tight without using glue. In my opinion, it just looks better to insert it tightly than to glue it in.
To insert each block inside the space on its designated bar, you'll need a rubber hammer and a very small (watch type) hammer with a wide flat-surfaced center punch. The rubber hammer for the center and the small hammer to seat it properly at each corner. It doesn't take long at all if done right.
Using a SLA/LCD (Resin) printer for this design is highly recommended because it comes out smoother and the blocks inserts nicely without using any hammers or tools.