Oogie Boogie
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Figure of Oogie Boogie from Nightmare Before Christmas. Printable on a FFF machine.
- Rating
- 4.871 / 5
- Likes
- 871
- Downloads
- 3,363
- Makes
- 40
- Views
- 11,264
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Oogie Boogie Figure
Introduction
I created this figure mostly to practice sculpting in Blender. And since it turned out alright I thought I would share it on here. Since Oogie Boogie is basically a sack, the model can be printed easily enough. Speaking of it:
Printing Instructions
I printed the model you can see in the pictures on a Prusa MK3S+ in PLA without any issues. Layer height is 0.15mm with an infill setting of 10%.
I chose the orientation on the bed in a way that the model is only supported on the back and on the bottom side with supports on the build plate only. I placed the seam into the seam on the side of the model so that it won't be noticeable.
Final Words
If you have questions, remarks, suggestions, I would be happy to hear from you.
By the way, you also can support me and my work with a coffee at