Klick fix repair
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.75 net (excluding VAT)
For file: Klickfixfaste_0.2mm_PETG_MK3S_44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 43.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A spare clamp for Klick fix handlebar bag attachment
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
The clamps holding my 25 odd years old Klick fix attachment to the handlebar broke. I found it was quite easy to print a replacement.
Print with PETG, flat on the bed.
Use roughly 6 perimeters to make it strong.