1 / 2
Mini Shredder V1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It shreds things, crank-powered
- Rating
- 3.4 / 5
- Likes
- 383
- Downloads
- 955
- Makes
- 3
- Views
- 8,605
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a mini-shredder I designed to shred garden catnip. I grow a lot of it, and using an “Herb” grinder was getting tiresome.
Tolerances are tight, so make sure you print with a well-leveled bed. No glue is necessary, the gears and rotors should fit snugly on the axle. You might need a hobby knife to bevel the rotors and spacers if you get some elephants foot.
Part quantities required:
- End Plate x2
- Side1 x1
- Side2 x1
- Axle x1
- Axle2 x1
- Gear x2
- Crank x1
- Spacer x15
- Rotor x15
Fasteners required:
- 12x M2 screws, length not critical as long as it's over 10mm. There's plenty of room for variance. It will work fine with 8x or even less if you're in a pinch.
It will rotate stiff, but should wear in quickly enough.
I'm working on a revised version that will be motor powered, and a loading hopper for the top.