IKEA Oxberg hinge pad
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.79 – €0.97 net (excluding VAT)
For file: ikea-hinge-pad_02mm_pla_mini_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 52.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This helps to fit Oxberg door onto old Billy bookcase (pre-2015 model). Normally it leaves ~1cm gap between doors.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 621
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
This helps to fit Oxberg door onto old Billy bookcase (pre-2015 model). Normally it leaves ~1cm gap between doors. This pad offsets it a bit to make the gap smaller. Adjust further with hinge itself to make nice fit.
Print instructions
It's really just a pad, anything will do. This was printed on MINI, black PLA, 15% infill, 2 perimeters.