1 / 5
Eibos Cyclops Desiccant riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Addon for Eibos Cyclops Filament dryer1) Dryer chamber not holding its humidity 2) Heat causing filament to fuse
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 190
- Makes
- 5
- Views
- 1,854
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Update 8/18/2023
- Revised design of riser to have slide locks so no glue is necessary
- added PTFE tube outlets in the riser shell to allow easy access of the filament
Update 10/28/2022
- removed the gaps on the mating surfaces for the front and back shell models
After testing this is what I observed
- filling the 2 desiccant chambers and plugging all the openings of the lid it has maintained below 20% humidity for 3 days so far.
- Thinking of adding a one way valve for the holes on the top of the lid… any ideas would be helpful
Update!!
I have modified the lids and heat distribution riser plate
This is my 1st model……..
- Make sure to print this in a high temp material PC or annealed PLA
- Riser front and back mating faces should be sanded before gluing