HTC Vive station mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.24 – €2.74 net (excluding VAT)
For file: vr-mount-bottom_0.2mm_PLA_MK3S_2h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.49 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Jig to mount HTC Vive base station to a stand with 1/4" photography thread.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 1
- Views
- 483
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
After few iterations I am proud to finally present a decent jig to mount your HTC Vive base station without making a single hole in your wall. It was originally designed to go with camera tripod with camera thread. Uses ball joint pivot from original mounting bracket.
It securely holds the ball joint so that base station does not move, allowing an angle of around 30 degrees in any direction. I made it big enough so that no tools are needed when fastening. Also I created custom threads so that ts is easily printed in PLA and holds firm, with some wiggle room when material yields. Printed on Prusa MK3S and without post-process goes right onto the stand. I printed it in 0.2mm SPEED default profile as included.
Any requests welcome.