1 / 2
Large Train Wheel Coaster!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large coaster inspired by a driving wheel from a high speed steam engine
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 103
- Makes
- 1
- Views
- 561
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
A three piece, four colour coaster.
The large format 150mm / 6.25" diameter coaster is easy to use!
The blue spoke section was printed at 0.15mm to preserve the small radius.
The black background printed at 0.2mm with 0 bottom layers.
The two colour wheel section was printed at 0.25mm, mostly due to time restraints that day. I used silver silk PLA with three top layers of white.
10%-15% infill should be sufficient.
No supports
I used a Brim on the “Wheel” section, although it may not be needed.