Can Holder (D59mm_H30mm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.17 – €1.43 net (excluding VAT)
For file: Bottle Holder_D59mm_H30mm_2_0.25mm_PLA_MINI_1h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.30 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for pressurised can/bottles
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 58
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a can holder without the supports or edges, to fix it directly to the wall or furniture.
I have remixed the model from Olo Deepdelver, removing the back edges, moving the screw hole and adding a small extrusion at the back just to be sure the support will not move and will be vertically aligned on the wall (I have printed the model with small support for extrusion to be sure it will not bend).
2x4mm holes needed on the wall, one for the screw and one for the extrusion.