1 / 4
LumenPnP Power Switch Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design adds a simple SPST power switch for the Opulo LumenPnP Pick-and-Place machine.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 100
- Makes
- 1
- Views
- 598
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This design adds a simple SPST power switch for the Opulo LumenPnP Pick-and-Place machine. The switch mount attaches to the left side of the machine, and bolts to the 2020 extrusion on that side.
Designed to utilize this switch: https://www.amazon.com/dp/B07XD8J2PL
You will need:
- 1x SPST Power Switch (21x15mm, similar to above)
- 2x M5x8 Button Head Hex Screw (There should be extras in your kit)
- 2x M5 Drop-In T-Slot nuts (There should be extras in your kit)
- 4x M3x8 or M3x10 Cap or Button Head Screws (There should be extras in your kit)
- Wire (I used 2-wire paired 22AWG)
- 1x Female barrel jack (optional)
Assembly:
- Print the parts
- Install the switch
- Pass the wires into the enclosure and tie a knot in each to provide strain relief
- Solder the positive wires to the switch
- Solder the negative wires to each other
- Install the back cover with 4 M3 bolts
- Install the assembly onto the left 2020 extrusion with two drop-in t-nuts and the M5 bolts
- Trim and connect the output wire to your MoBo
- Connect the Power Supply into the input side of the switch box (or connect the optional barrel jack