Piemont Sword -Full Size-
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made my own interpretation of an Piemont Sword from the 1800's. I modeled it using Sketchup. This model will also…
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 122
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
I made my own interpretation of an Piemont Sword from the 1800's. I modeled it using Sketchup. This model will also fit togehter directly after the print due to me making the pins a little smaller than the holes. Will also be doing this to the older swords at some point.
Warning! These files were made when 3D printers were terrible so fitment issues will occur on todays printers. If you want a good fitment I suggest you take the full sword file and cut it yourself and add a rod inside it.
Post-Printing
Glue all the parts together with strong epoxy and finish with some sand paper and a paint job of your choice. Good luck!
Category: Props