1 / 3
Mini12864 LCD mount for Monoprice Select Mini
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the display with a new LCD.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Replaced the mainboard with a different one and used the Mini12864 display for the project.
There are two versions of the display. The Fysetc one has a longer reset button, and this one is designed for that one. If you use the BTT version of the Mini1286, it has a shorter reset button, so you will need to print a small cylinder and glue it onto the back of the reset pusher so it can reach the button.
You will need:
- 4 M3x6 screws to mount the display into the holder
- 4 M3x8 screws to mount the display onto the printer
- 4 M3 nuts for the above to screw into.
Find the Fusion 360 file below.