Kitchen Cabinet Shelf Support (5mm peg)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.15 – €1.41 net (excluding VAT)
For file: Kitchen_Shelf_0.15mm_PETG_MK3S_1h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.28 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.65 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement support for my shelf supports in my kitchen, which use a 5mm peg. FreeCAD files included for easy remixing.
- Rating
- 4.75 / 5
- Likes
- 45
- Downloads
- 313
- Makes
- 5
- Views
- 915
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pretty simple model. I made it larger than the old supports as we use a lot of heavy glass jars in our kitchen. Use PETG, ABS, ASA, or other strong material; PLA will slowly deform under weight. Print with lots of infill for strength (I used 70% gyroid) and print with the flat side down to make sure the layers are under compression (see GCODE or project file). The GCODE is for printing 4 of them at once, which is what we needed for our shelves.