1 / 1
Nest Indoor Wired Camera (2nd Gen) Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two mounting plates for the Google Nest Indoor Wired Camera (2nd Gen), both based off the plate included with the camera
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 153
- Makes
- 0
- Views
- 786
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Summary
- Nest indoor mount.stl is an alternative to the plate included with the camera. Ensure you print with supports on.
- Nest indoor mount threaded.stl is meant to be used with a 1/4" threaded insert, allowing you to attach this camera to more conventional mounts. This should be printed with supports on, however, I've also removed the supports for printing in the hole for the threaded insert, as it's a pain to get out. The depth of the hole is 6mm, while the diameter is 7mm.
Printing
- Nest indoor mount.stl should be printed at 100% infill with conventional supports everywhere (not just touching build plane)
- Nest indoor mount threaded.stl can be printed at 25% infill with conventional supports everywhere (not just touching build plane), but should also have a block of solid, 100% infill, plastic around the hole for the insert.