Large Light Up Monster Eyes and Teeth
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.70 – €15.52 net (excluding VAT)
For file: LED_Eye_0.2mm_PLA_MK3S_14h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.11 excluding VAT (range midpoint).
- Weight reported by the author
- 160 g
- Print time reported by the author
- 14.91 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Eyeballs and teeth for decorating whatever. (In my case, I decorated the back of my car for Halloween Trunk-or-Treat)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 48
- Makes
- 1
- Views
- 717
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- GNU General Public License v3.0
I designed some LED lit eyeballs and teeth to decorate my car trunk for Halloween. I thought folks may want to use them for other projects.
I printed the eyeball in white, the pupil in black, and the iris in clear PLA. To make them light up, you'll a soldering iron and:
1x 5mm 3v LED
1x CR2032 3v coin cell battery
1x CR2032 coin cell battery holder
1x Slide Switch
Then, optionally, if mounting to armature wire.
1x 3mm armature/craft wire.
1x M3 heatset insert
1x M3 screw (short)
You can also use some splicing connectors for easy attachment and removal of the front eyeball assembly. Such as Wago 221s, etc.
Solder the anode of the LED to the slide switch, and the slide switch to the positive terminal on the battery holder. Solder the negative terminal on the battery holder to the cathode on the LED. Using splicing connectors in between the battery/switch and the cathode/anode can make it easier to disassemble and reassemble the eye.
Hope someone else has some fun with this one. :)