1 / 3
Clip for Grizzly G0704 1/2" T-Slot — image 1
1 / 3

Clip for Grizzly G0704 1/2" T-Slot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip to hold chip/tool tray to mill table with 1/2" T-slots. Toaster oven pans fit just about perfect, but you could…

Rating
0 / 5
Likes
2
Downloads
18
Makes
0
Views
205
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Clip to hold chip/tool tray to mill table with 1/2" T-slots. Toaster oven pans fit just about perfect, but you could use Masonite, plexiglass, or sheet metal if your goal is just to keep chips out of the slots..

Design is loosely based on the one shown by Clough42, but sized to fit the Grizzly mill instead of a Bridgeport: https://www.youtube.com/watch?v=VzWYgwVHggE

I designed the clip for 10-32 screws, and then couldn't find my 10-32 screws. I drilled and tapped the clips for 1/4" screws, which worked fine.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.24mm

Infill:

60

Filament: Overture PETG grey


Notes:

Print with the largest surface down on the bed. No support needed. I used PETG, but it probably doesn't matter much.

Category: Machine Tools

Tags