Sewing frame H key
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Continuing my trend of bookbinding tool parts, an H key for a sewing frame. You need a few of these if you want to…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 109
- Makes
- 1
- Views
- 697
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Continuing my trend of bookbinding tool parts, an H key for a sewing frame. You need a few of these if you want to bind books with tape.
Ignore my previous suggestion of chipboard, it's a lot of work for a key that won't last very long. I tried quarter inch oak, but that splits too easily along the grain, I might upload some pictures later, but trust me, it doesn't work. I bought some quarter inch pine plywood, I'll see how that works when I have some time.
Instructions
Either print the .stl on a 3d printer or lasercut the .dxf on a laser cutter.
Also I made a second .scad and .dxf in imperial units designed to be cut out of wood. For that one use a quarter inch drill to drill the holes, then chisel out between them. Finally cut out around the outline with whatever tool you prefer. I'm fond of a Japanese woodworking saw in conjunction with a chisel.
Category: Parts