X-Wing Tokens and Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tokens and token organizer for X-Wing: Miniatures Game (2. Edition)
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 254
- Makes
- 3
- Views
- 1,703
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Accessories for X-Wing: Miniatures Game (2. Edition)
Tokens
The tokens have the same dimensions as the carboard ones, but they are a bit thinner (1.6mm).
They were printed at 0.2mm layer height.
The tokens can be printed in multiple colors using filament changes. The filament changes are at 0.4mm and 1.2mm. Charge, Shield and Force tokens, which have different colors on the front and back, require a third filament change at 0.8mm.
| Tokens | Start Color | Change at 0.4mm | Change at 0.8mm | Change at 1.2mm |
|---|---|---|---|---|
| Focus, Calculate, Evade, Reinforce | black | green | no change | black |
| Disarm, Jam, Tractor | black | orange | no change | black |
| Cloak | black | blue | no change | black |
| Stress, Ion, Strain, Deplete, Critical | black | red | no change | black |
| Fuse | black | white | no change | black |
| Shield | black | red | blue | black |
| Charge | black | red | yellow | black |
| Force | black | red | violet | black |
If you want printed target lock tokens, take a look at this model by StrangelyTyped. Note that the target lock tokens are thicker (2.5mm), so you will have to scale them down along the z-axis to 2mm if you want to use the orgainizers.
Organizer
The organizers can hold the cardboard tokens as well as printed ones. The organizers have several slots.
| Organizer | Tokens | Slots | Tokens per Slot |
|---|---|---|---|
| Charge Organizer | Charge, Shield, Force | 8 | 8/10* |
| Charge Organizer Small | Charge, Shield, Force | 3 | 8/10* |
| Round Organizer | any round token | 8 | 8/10* |
| Square Organizer | any square token | 6 | 8/10* |
| Square_Single Organizer | target locks | 9+2 | 2 |
| Square_Single_Long Organizer | target locks | 15+4 | 2 |
| Hexagonal Organizer | any hexagonal token | 3 | 8/10* |
*the organizer fits 8 cardboard or 10 printed tokens (cardboard tokens are thicker than printed ones)
The Crate for the Organizers was taken from Star Wars Imperial Crate 4 (2 Parts) by aldobme and slightly modified.
One crate can fit:
- 1 Charge Organizer (80 printed or 64 cardboard tokens)
- 1 Charge Organizer small (30 printed or 24 cardboard tokens)
- 1 Round Organizer (80 printed or 64 cardboard tokens)
- 1 Square Organizer (60 printed or 48 cardboard tokens, plus 4 pairs of target lock tokens)
- 1 Square_Single_Long Organizer (19 pairs of target lock tokens)
- 1 Hexagonal Organizer (30 printed or 24 cardboard tokens)
The Organizers were printed at 0.2mm layer height. They don't need supports. I've used lightning infill to save filament.
The Crate was printed at 0.2mm layer height. The bottom requires supports.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
UPDATE [2024-12-28] Added Files for the Crate to this model