1 / 2
SunFounder Raspberry Pi Screen mount for 3030 Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the SunFounder Raspberry Pi touchscreen monitor that is designed to affix to 3030 aluminum extrusion
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 1
- Views
- 579
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a mount for the SunFounder 7 Inch Raspberry Pi Touchscreen for 3030 aluminum extrusion. Used here on my Ratrig 3D Printer. It can be mounted in 4 different orientations for easy positioning and then full tilt.
You will need two M6-12 bolts and drop in nuts for the extrusion as well as a ¼-20 or 6mm bolt (1-½ or 40mm long) and a securing knob. The screen takes four M4 x 8mm screws.
The mounting pattern is 75mm evenly spaced.
The screen is available on Amazon: https://amzn.to/3DHuNf2