DIN108 Dia Magazin Slide Feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are different kind of Dia Magazine Slide Feeders out there. Unfortunately, not all magazines use the same pitch.…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 137
- Makes
- 1
- Views
- 764
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
There are different kind of Dia Magazine Slide Feeders out there.
Unfortunately, not all magazines use the same pitch.
Universalmagazin DIN 108 (Reflecta, Hama, Leica) uses 5.5mm pitch
Paximatmagazin (Braun, Revue) uses 5.04mm pitch
There are scanners that can only feed DIN108 magazines and it is not easy to transfer a Paximat magazine into a DIN108 magazine because of the different pitch.
So my solution here is a DIN108 magazine, but with a pitch of 5.04mm as is common with Paximat. So you can tilt Paximat magazines into this magazine and this magazine here will fit through the scanner as usual.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
15%
Filament: Prusament PLA
Notes:
Surprisingly, you can print this magazine on a Prusa i3 MK3S diagonally in one piece and WITHOUT support material!
CAD Model:
Category: Camera