Ankermake M5 - Spare Parts Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ankermake M5 Spare Parts Storage (Hot End & Nozzles)
- Rating
- 4.778 / 5
- Likes
- 132
- Downloads
- 844
- Makes
- 10
- Views
- 4,042
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a simple storage bin to hold the extra hot end and nozzles that came with the printer for Kickstarter backers. The lid does latch in, though a little bit loosely (0.2mm overall).
V1 removed. A few people have printed V2 with success on hot end clearances (That's also the only change done to the source model). If anybody would like the V1 file returned for whatever reason, send me a message.
The nozzles sit loosely in the holes without too much wiggle.
The lid has my logo on it.
V2 changes:
-Shifted the centerline of filament hole to line up better (0.5mm to the right)
-Adjusted the heights of a few features of the hot end
-Opened up the left side of the heatsink area (at the top) to make it less tight. Also lowered a feature on the right down 0.5mm to close the gap a bit.
On my printer, the start/end areas have some bubbling that looks like it's from the end of the layer (Need to try coasting settings; This is my first printer). Two of the holes for nozzles were a bit tight from this (namely the bottom left one).